Install CM10.1 for Galaxy S i9000 (Android 4.2.2)

Overview

This tutorial will explain how to Install CM10.1 for Galaxy S i9000 (Android Jelly Beans 4.2.2).
Only for Android 2.3.3 and above, Android 2.3.2 and below Should upgrade to 2.3.3-2.3.6 before changing to CM10

CM10.1 for Galaxy S i9000

Download

  1. ClockWorkMod 4.3 for Galaxy S1 Only:
    CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip Galaxy S1 Only
  2. Latest CM10.1 for Galaxy S i9000 nightly builds:
    i9000: CM10.1 for Galaxy S i9000
  3. Latest Google Apps:
    Google Apps for Android
  • If you need a different Modem have a look at ROM-Manager for other Modems.

Installation

Step 1 – CM10.1 installation first step is installing a custom recovery

ClockWorkMod (CWM) Recovery Installation Instructions

  1. Extract CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip to any folder
  2. Go into Setting ->Developers option and enable USB Debugging on your Galaxy S1
  3. Power off your device
  4. Boot into Download-Mode using Volume Down + Home + Power
  5. Hit Volume Up to accept the warning
  6. Start Odin (1.85)
  7. Choose CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar as PDA
    (Don’t mark re-partition and flash lock!!!)
  8. Connect your Phone
  9. Start flashing

Step 2 – Now that you have CWM installed you can continue to CM10.1 installation

  1. Copy GApps and CM10.1 ZIPs to your internal SDCard
  2. Boot into Recovery
    • Volume Up + Home + Power: boots your Phone into Recovery Mode.
    • Volume up: Highlight up
    • Volume down: Highlight down
    • Home: select
    • Power: back
  3. Flash CM10.1 zip from internal SD-Card
  4. Flash GApps zip from internal SD-Card
  5. Wipe Data / Factory Reset (resolves several issues)
  6. Reboot

Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

 

Upgrading

Upgrading from an earlier version of CyanogenMod 10:

  1. Copy CM10.1 ZIP to your internal SD-Card
  2. Boot into Recovery
  3. Flash CM10.1 zip from internal SD-Card
  4. Flash CM10.1 GAPPS zip from internal SD-Card
  5. Reboot

 

5 thoughts on “Install CM10.1 for Galaxy S i9000 (Android 4.2.2)

  1. Karan

    is the battery issue solved…bcoz there were a lot of unnecessary huge battery drain in previous version of jellybean for I9000…CM/slimbean,etc all had problems of battery drain..
    so how is the battery life of this new firmware ?

    Reply
    1. admin

      We have installed this version of CM10.1 on a few i9000 devices and they all run without the battery issue you have mentioned.
      My advice is you should update your device to 2.3.6 stock and then install CM10.1 on your device, if you still have an issue you can always go back to stock.

      Reply
  2. con tan

    I follow your instruction and installed the Android 4.2.2 . I don’t have any issues at all. Many thanks for your information.

    Reply
  3. Alion13

    I can’t find the Developers option and enable USB Debugging on my Galaxy S1, but i tried to install cynogenmod 10.2 without this step and it worked . The CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar that you uploaded didn’t worked as well but I had an identical one on my pc from an old rom installation and mine worked 😐 . Anyway thanks for your tutorial , it helped me a lot !!!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.